Aligning The Support Ring; Protective Conduit And Hose For Air Regulator - Speck pumpen BADU Jet PRIMAVERA Installation

5 Installation
Mounting the main housing in a foil pool
Please observe 5.2.3: Aligning the support ring
34 106
5.2.3

Aligning the support ring

The four holes marked (1) must always be positioned at a 45° angle to
the centre axis.
5.2.4

Protective conduit and hose for air regulator

Lay and fasten the protective conduit and the hose for the air regulator
above the water level.
66 EN VG 766.2320.050
1
105
(1)
(1)
Liner pool
26
(1)
(1)
Fig. 8
30
103
27
70
28
52
Fig. 7
12/2014