Installing Or Removing The Cover/Strainer Basket - Speck pumpen BADU Delta Serie Fiche Technique

Depending on the installation type, air can gather under the inserted
viewing window. This is normal and harmless. It will not affect the
functions of the pump.

Installing or removing the cover/strainer basket

Changing the battery in the transparent inlay
1. Switch pump off.
2. Close shut-off vlaves.
3. Remove lid.
4. Unscrew the small lid (1) with the two pins (2) of the opening device.
5. Remove the inlay.
6. Push the LED out of the bottom of the inlay.
7. Exchange the batteries. 2x Type CR2032, 3V
Observe the pole (+/-)!
8. Assembly in reverse order.
09|2020 EN 11