Defects; Overview - Speck pumpen BADU Jet PRIMAVERA Installation

8 Defects

8 Defects
It is normal for a few drops of water to escape from the mechanical seal
from time to time. This is especially true during the break-in period.
Depending on the water quality and number of operating hours, the
mechanical seal can begin to leak.

We recommend first informing the swimming pool contractor if there are
irregularities.
8.1

Overview

Problems
Pump is deactivated by
the motor overload
switch
Pump is stuck
Water is constantly
leaking from the pump
Loud motor noise
80 EN VG 766.2320.050
If water pours out constantly, replace the mechanical seal.
Possible Solution
cause
Overload

Sticky

mechanical seal
because of long
idle period

Mechanical seal

is leaking
Faulty ball

bearings
Check the pump
(see Chapter 8.1.1,
P. 81).
Turn the motor shaft
(see Chapter 6.1,
P. 78).
Clean pump.
Replace the
mechanical seal.
Have a mechanic
replace the ball
bearings.
12/2014