Description; Components; Function - Speck pumpen BADU Jet PRIMAVERA Installation

3

Description

3.1

Components

(1)
(92) Pump
(54) Nozzles
(111) Air regulator
3.2

Function

The pump (92) is connected via the suction and pressure line with the
plastic main housing (1). The pump is switched ON/OFF with the
pneumatic button (38/1). The pool water is sucked in by the pump (92)
via the circulating annular channel in the light cover and suction panel
with a low flow rate and pumped back into the pool under high pressure
through the nozzles (54). The flow rate of the two nozzles (3) can be
controlled with the rotary knob of the volume regulator (21/1). Air can
optionally be added to the nozzle stream with the air regulator (111).
The system is equipped for effect lighting with integrated LED
submersible lighting that can be switched ON/OFF with the pneumatic
button (38/2).
12/2014 VG 766.2320.050
(92)
Main housing
(1)
(21/1)
(54)
(111) (38/1)
(21/1) Volume regulator
(38/1) Pneumatic button pump
(38/2) Pneumatic button light
3 Description
EN 57