Maintenance Intervals; Table Maintenance Intervals; Replacement Parts/Accessories - Grizzly BRM 56-163 BSA Q-360 Notice D'utilisation

GB

Maintenance Intervals

Regularly carry out the maintenance work listed in the "maintenance intervals" table.
Regular maintenance prolongs the life of the equipment. It also gives optimum cutting
performance and avoids accidents.

Table maintenance intervals

Maintenance Work
(See "cleaning and maintenance")
Check and tighten screws, nuts
and bolts
Check the engine oil level / petrol
level and refill with engine oil /
petrol if required
Clean operating elements / the
area around the silencer
Clean the finger protection
Change the engine oil
Replace the air filter
Clean/adjust the spark plug
Replace the spark plug
Check the silencer and spark
catcher
Clean the air cooling system
Clean more often if there is a high level of dust or heavy dirt
a

Replacement parts/Accessories

Spare parts and accessories can be obtained at www.grizzly-service.eu
If you do not have internet access, please contact the Service Centre
(see "Grizzly Service-Center").
If further spare parts should be neces-sary, please find the part number on the exploded
drawing.
Replacement parts and accessories for the engine (e.g. air filters and spark plugs) can
also be ordered directly from Briggs & Stratton:
http://www5.briggsandstratton.com/eu/de/corp/find_location/
106
Before After After 1
a
a,
5 Hrs.
Work




After After
st
8 Hrs. 50 Hrs.






Annual




