Intended Use - FLUX VISCOFLUX lite Manuel D'instructions Original

3

Intended use

The drum emptying system VISCOFLUX lite is used for the convenient emptying of highly
viscous, just flowing media from ISO drums with lids.
Emptying must be performed under supervision.
The drum emptying system is used in conjunction with eccentric worm-drive pumps with
outer Ø 54 mm (e.g. FLUX Pump F 550, F 560).
The drum emptying system must not be used for flammable materials or in explosion
hazard areas!
The drum emptying system must not be exposed to weather.
Resistance to chemicals must be considered.
The drum emptying system must always be adapted to the material to be pumped (see
resistance chart).
When changing the material to be pumped, internal instructions must be observed.
Take into account any possible chemical reactions and any hazards to health and
material damage that can result from these.
Failure to observe the above can lead to damage to the drum emptying system and to
injury to operating personnel.
Operating instructions VISCOFLUX lite 25 / 60