Pelgrim IDK935 Notice D'utilisation page 76

25
installation dimensions
5 5 . Remove the protective layer from the sealing tape and apply the tape in the
groove of the aluminium profile or on the edge of the glass plate. Do not
stick tape round the corners, but cut 4 separate pieces to seal the corners
well.
6 6 . Turn the hob over and lay it in the recess.
7 7 . Connect the appliance to the mains. A short bleep will be heard and all the
displays will light up briefly. The appliance is ready for use.
8 8 . Check that it works properly. If the appliance has been wrongly connected
either a bleep will sound or nothing will appear in the displays, depending on
the error.
9 9 . Hand the instructions for use to the client or keep the manual yourself.