19
installation dimensions
Safety
-
The connection must comply with national and local regulations.
-
The appliance must always be earthed.
-
This appliance may only be connected by a competent electrical installer.
-
The connection cable must hang freely and is not to be fed
through a drawer.
-
The worktop the hob is built into must be flat.
-
The walls and the worktop surrounding the appliance must be heat resistant
up to at least 85 °C. Even though the appliance itself does not get hot, the
heat of the hot pan could discolour or deform the wall.
-
Damage caused by incorrect connection, installation or use,
will not be covered by the guarantee.
Clearance
Sufficient all-round clearance is essential to the safe use of the hob. Check that
there is enough clearance.