Pelgrim IDK935 Notice D'utilisation page 62

11
controls
Memory cooking
Memory cooking enables you to record and run your
own cooking programme for each zone seperately.
When you record a programme the settings you
select will be stored automatically. A programme may
last a maximum of 4 hours.
Recording a programme
- Put a pan with contents on a cooking zone
- Press the memory button "M" until the "record"
light starts flashing.
- Switch the appropriate zone on to the required
power level.
The "record" light will be on continually.
After a few seconds the display will alternately show the selected setting
and "rE". The cooking times and settings will be stored automatically
during the cooking process.
- While you are cooking, the setting can be adjusted using the +/- button.
- At the end of the cooking process press the on/off button or the Memory
button to stop recording the cooking programme.
Running a programme
- Put a pan with contents on the appropriate cooking
zone.
- Press the memory button "M" until the "play" light
starts flashing.
- Switch the zone on using the on/off button.
The "play" light will be on continually.
After a few seconds the display will alternately show the selected setting
and "PL".
- The programme will run automatically according to the recorded cooking
times and settings.
- Press the on/off button to stop the programme.
- During running a programme you can change the setting of the zone,
while the programme continues.