Publicité
Les langues disponibles
Les langues disponibles
LEVIGABORDI – EDGE SANDER – PONCEAUSE -
INSTRUCTIONS FOR REMOVING THE SAWDUST PRODUCED DURING WORK
Danger:
When working on wooden floors, remember that sawdust is inflammable and
may ignite spontaneously causing damage and or personal injury.
If the vacuum accessory is used, the sawdust collected in the bin or paper bag
must be disposed of appropriately.
Always empty sawdust into metal containers situated in the open air.
Danger:
Sawdust is inflammable and may ignite spontaneously causing injury or
damage.
Empty the dust bag every time you finish using the machine.
Do not abandon dust bags full of sawdust.
Do not empty the contents of the dust bag over a fire.
Do not re-use paper bags but replace them with new ones.
PERSONAL SAFETY
Warning:
Sawdust may leak into the air and be breathed in when using the machine.
Always wear a face mask with dust filter when using the sander.
Warning:
Failure to wear eye protection and protective clothing may result in injury while
sanding. Always wear safety goggles, protective clothing and face mask when
using the machine.
COMPLIANCE WITH SAFETY STANDARDS
Danger:
Using the machine when not fully assembled may result in damage and/or
personal injury. Do not use the machine if incompletely assembled. Keep all
guards closed. Maintain machine adjustment as specified.
Danger:
Damage or injury may result if the sander is used without guards and covers in
place. Always check that all guards and covers are in place and well fastened.
Danger:
Sanding wooden floors may generate an explosive environment. Cigarettes,
cigars, lighters, pilot lights and any other naked light may trigger an explosion if
used when sanding. Do not use naked lights in the working area.
Danger:
Poorly ventilated working areas may result in an explosive environment due to
the presence of volatile materials such as solvents, alcohol, fuel, certain paints,
sawdust and other flammable materials. Floor sanding machines can ignite
flammable materials and fumes. Read the instructions on any chemical products
used to determine their flammability. Keep the working area well ventilated.
Danger:
Contact with nails when sanding may generate sparks and cause fire. Always
flatten or remove all nails before sanding floors.
Danger:
Electric shock may result if the power supply cuts out repeatedly due to
overload. Have fuses, overload cut-out and mains circuit checked by an
authorised electrician.
Danger:
Electric shock may result if maintenance and/or repairs are carried out on the
machine while it is connected to the mains supply. Disconnect the mains before
carrying out any form of maintenance and/or repairs.
Danger:
Using the machine with an unearthed mains supply may result in electric shock.
Never disconnect or disable the earth circuit. Consult an electrician if no earth
MANUALE DI ISTRUZIONE – USE AND MAINTENANCE HANDBOOK – MANUEL POUR L'EMPLOI - BEDIENUNGSAINLEITUNG
BLIZZARD
USER SAFETY RECOMMENDATIONS
BORDERSHLAUFMACHINE
ED.07
Pag. 17/40
Publicité
Chapitres
