Publicité
Les langues disponibles
Les langues disponibles
LEVIGABORDI – EDGE SANDER – PONCEAUSE -
We recommend storing the machine in its original packaging, which is composed of two parts,
one containing the motor body and the other containing the handle.
If the machine is removed from its original packaging and not used for long periods the wheels
and the roller must be raised from the ground to prevent deformation. Set the machine on two
blocks at least 50 cm high, making sure it is resting on the base.
Store the machine in a dry place. Storage in damp conditions will result in damage to the
machine.
Storage temperature -20°C to 50°C.
TRANSPORTING AND HANDLING THE MACHINE
WARNING:
Since the machine is heavy, remove the motor before transport. Ask for help
lifting the machine and motor.
TRANSPORT BY ONE PERSON
To facilitate transport, the machine can be disassembled into two parts:
-
Handle (fig. 2).
-
Motor body (fig. 3).
proceed as follows:
1. Check that the mains lead (16, fig. 8) is disconnected from the mains supply and the
machine;
2. Disconnect the motor power supply plug from the bottom of the box fixed to the handle
(release the safety mechanism and unplug). (6, fig. 3);
3. Keeping the handle steady in a vertical position, remove the centring pin on the base
(2-3, fig. 2);
4. By turning the handwheel (4, fig. 2) in an anti-clockwise direction, the centring pin (3,
fig. 2) is automatically extracted about two thirds of its total length; remove the pin
completely by pulling outwards;
5. Remove the handle by pulling it out of the motor base (1, fig. 1) and reposition the
centring pin in the drum inside the handle;
6. Lift the motor base using the handles on the top (8, fig. 5).
TRANSPORT BY TWO PEOPLE
With two people to move the machine, proceed as follows:
1. Check that the mains lead (16, fig. 8) is disconnected from the mains supply and the
machine;
2. Person one stands to the right of the machine, holding the right grip on the handle (9, fig.
6) and the right handle on the base (8, fig. 5);
3. Person two stands to the left of the machine, holding the left grip on the handle (9, fig. 6)
and the left handle on the base (8, fig. 5);
4. Both people lift the machine at the same time.
ELECTRICAL CONNECTIONS
Caution:
The machine is designed to operate exclusively at the voltage and frequency
indicated on the machine information plate.
Check that the power supply corresponds to these values before connecting the
mains lead.
Danger:
Exposing the machine to water or rain constitutes a risk of electric shock. Use
and store the machine in a dry place.
MANUALE DI ISTRUZIONE – USE AND MAINTENANCE HANDBOOK – MANUEL POUR L'EMPLOI - BEDIENUNGSAINLEITUNG
BORDERSHLAUFMACHINE
BLIZZARD
STORAGE
BEFORE STARTING
ED.07
Pag. 15/40
Publicité
Chapitres
