Storage - Kunzle & Tasin Bona Scorpion Manuel D'utilisation

Operator Safety (Cont.)
Airborne sanding dust should not be breathed in while operating
a sanding machine. Always wear an approved particulate
respirator while operating sanding equipment.
Injury to the eyes and or body can occur if protective clothing
and or equipment is not worn while sanding. Always wear
hearing protection, and a dust mask while sanding.
Exposure to high noise levels can cause hearing loss or
impairment. Wear EN-ISO approved hearing protection
(earmuffs) when using this equipment.

Storage

It is advisable to store the machine in its original packaging.
Doing so makes it possible to form a column of two packages
maximum, with one on top of the other.
If the machine is removed from the original packaging and is not
used for some time ensure the wheels and d are not in contact
with the ground. In this case use two supports at least 50mm in
height to rest the machine on, ensuring contact is with the
base frame.
6
Bodily injury could occur if power is supplied to the machine
with the power switch already in the "ON" position. Always
check to assure the power switch is "OFF" before connecting
the machine to its power source.
DO NOT use this machine to sand steps or furniture.
DO NOT ride on this machine.
DO NOT put any objects into openings. DO NOT use with
blocked openings. Keep free from dust, lint, hair or anything
that may reduce airflow.
This equipment is for dry use only and must not be used or
kept outside in wet conditions. Store the machine in a dry
building, otherwise the machine could be damaged. Storage
temperature from -20°C to 50°C.
Bona Scorpion Manual