2.2. Safety in the workplace
a)
Make sure the workplace is clean and well lit. A messy or poorly lit workplace
may lead to accidents. Try to think ahead, observe what is going on and use
common sense when working with the device.
b)
Do not use the device in a potentially explosive environment, for example in
the presence of flammable liquids, gases or dust.
c)
If you discover damage or irregular operation, immediately switch the device
off and report it to a supervisor without delay.
d)
If there are any doubts as to the correct operation of the device, contact the
manufacturer's support service.
e)
Only the manufacturer's service point may repair the device. Do not attempt
any repairs independently!
f)
In case of fire, use a powder or carbon dioxide (CO2) fire extinguisher (one
intended for use on live electrical devices) to put it out.
g)
Children or unauthorised persons are forbidden to enter a work station.
h)
Use the device in a well-ventilated space.
i)
Please keep this manual available for future reference. If this device is passed
on to a third party, the manual must be passed on with it.
j)
Keep packaging elements and small assembly parts in a place not available to
children.
k)
Keep the device away from children and animals.
l)
If this device is used together with another equipment, the remaining
instructions for use shall also be followed.
Remember! When using the device, protect children and other bystanders.
2.3. Personal safety
a)
Do not use the device when tired, ill or under the influence of alcohol, narcotics
or medication which can significantly impair the ability to operate the device.
b)
The device is not designed to be handled by persons (including children) with
limited mental and sensory functions or persons lacking relevant experience
and/or knowledge unless they are supervised by a person responsible for their
safety or they have received instruction on how to operate the device.
c)
When working with the device, use common sense and stay alert. Temporary
loss of concentration while using the device may lead to serious injuries.
d)
To prevent the device from accidentally switching on, make sure the switch is
on the OFF position before connecting to a power source.
e)
The device is not a toy. Children must be supervised to ensure that they do not
play with the device.