Table des Matières
Publicité
Installation
4
Retirez le brûleur en le glissant vers la droite.
5
Suivez les instructions ci-dessous pour remplacer les orifices.
Orifice
Use a 1/2" open end wrench
b
to unscrew the orifice.
Screw each LP orifice in so the
orifice protrudes 15/16" (24mm)
(indicating full insertion).
© Travis Industries
(pour des installateurs qualifiés seulement)
Rotate the air shutter away
from the orifice and slide it out
a
to gain access to the orifice.
1/2" Wrench
Look here for the orifice identification
d
NG
Orifice Size
#46 DMS
4131120
c
Apply thread sealant to the LP
orifice prior to installation. Use
the chart below to identify the
correct orifice.
15/16"
24mm
LP
1.3mm
43
100-01364_FR
Publicité
Table des Matières
