Table des Matières
Publicité
26
Installation
Vent Configuration: sortie horizontale (pas de dénivelé)
La résiliation doit appartenir à la zone ombrée indiquée dans le tableau. Utiliser les positions
indiquées du réducteur de débit.
NG Applications
LP Applications
© Travis Industries
(pour des installateurs qualifiés seulement)
Optional 45 Degree Elbow
Vent with No 45° Elbow
3 feet
915mm
0 feet
mm
Vent with 1 45° Elbow
3 feet
915mm
0 feet
mm
Vent with No 45° Elbow
3 feet
915mm
0 feet
mm
Vent with 1 45° Elbow
3 feet
915mm
0 feet
mm
4131120
Termination
See the charts below to
determine maximum vent
• Exhaust Restrictor:
Remove the exhaust restrictor
and replace the screws.
• Intake Restrictor # 1 (stock)
• Diffuser Position # 1 (stock)
• Min. 4" (102mm) Horizontal Section
• Max.48" (1.2m) Horizontal Section(s)
• Exhaust Restrictor:
Remove the exhaust restrictor
and replace the screws.
• Intake Restrictor # 1 (stock)
• Diffuser Position # 1 (stock)
• Min. 4" (102mm) Horizontal Section
• Max. 24" (610mm) Horizontal Section(s)
• Exhaust Restrictor:
Remove the exhaust restrictor
and replace the screws.
• Intake Restrictor # 1 (stock)
14" Snorkel
• Diffuser Position # 1 (stock)
(REQUIRED)
• Min. 4" (102mm) Horizontal Section
• Max.48" (1.2m) Horizontal Section(s)
• Exhaust Restrictor:
Remove the exhaust restrictor
and replace the screws.
• Intake Restrictor # 1 (stock)
14" Snorkel
• Diffuser Position # 1 (stock)
(REQUIRED)
• Min. 4" (102mm) Horizontal Section
• Max. 24" (610mm) Horizontal Section(s)
100-01364_FR
Publicité
Table des Matières
