Installation
Dimensions minimales de cadrage - Vent Haut
Route the electrical line to
a position to the left rear
of the fireplace.
Minimum enclosure height = 36-1/4" (921mm)
© Travis Industries
(pour des installateurs qualifiés seulement)
33-1/2"
851mm
36-1/2"
927mm
WARNING: A cut-out for the gas line
may be required on the framing. See
the dimensions under "Gas Line
Connection" for details.
4131120
16-1/2"
419mm
The on/off switch/thermostat wire (if
used) should be routed to a location
near the right front of the fireplace.
15
100-01364_FR