10
Installation
Top Stand-Off Assembly
Les écarteurs supérieurs doivent être montés avant l'installation.
Warning:
You must follow the instructions below to elevate both standoffs. Failure to
do so will result in an extreme fire hazard.
AFTER
© Travis Industries
(pour des installateurs qualifiés seulement)
The standoffs are shipped in the flat position.
Make sure to follow the instructions below before
BEFORE
installing the fireplace.
Standoff
4131120
2
1
Bend the standoff in the numbered
a
sequence shown above.
Remove the screw below the standoff.
b
c
Replace the screw to secure the standoff.
3
100-01364_FR