Child Safety Function - Porter & Charles SOPS76TM Mode D'emploi

Programming the Cooking Stop Time
1. Touch sensor
2. Select the cooking stop time by pressing the + or – sensor.
3. You will hear 2 beeps, the display will show the current time and the AUTO symbol will
flash slowly to indicate that the oven will switch off automatically.
4. Select a cooking function and temperature.
5. When the cooking time is up, the oven will turn off, an alarm will sound and the AUTO
symbol will flash quickly.
6. Touch any sensor to stop the alarm and to turn off the AUTO symbol. The oven will
switch on again.
7. Set the controls to
any time by touching sensor
quickly. Now touch the + or – sensor to change time.
Programming Cooking Time and Cooking Stop Time
1.
Touch sensor
appears on the display.
2. Select the cooking stop time by pressing the + or – sensor.
3.
You will hear 2 beeps, the display will show the remaining cooking time
and the AUTO symbol will flash slowly.
4. Touch sensor
current time and the programmed cooking time.
5. Select the cooking stop time by pressing the + or – sensor.
6.
You will hear 2 beeps, the display will show the current time.
7. Select a cooking function and temperature
8. The oven will remain off and the Auto light will be on. The oven is now programmed.
9. When it is the time to start cooking, the oven will turn on and will operate for the
programmed cooking time.
10. While cooking, the display will show the cooking time remaining and the AUTO symbol
will flash quickly
11. When the cooking time is up, the oven will turn off, an alarm will sound, and the AUTO
symbol will flash quickly.
12. Touch any sensor to stop the alarm and to turn off the AUTO symbol. The oven will
switch on again.
13. Set the controls to
any time by touching sensor
quickly. Now touch the + or – sensor to change time.

Child Safety Function

This function can be selected at any time while using the oven.
To activate the function, press the + and – sensor at the same time for several seconds. You will
hear a beep and the display will show the word SAFE. The clock is locked.
If the oven is off and you activate the child safety function, it will not work even if a cooking
function is selected.
If this function is activated while you are cooking, it will only lock the electronic clock settings.
If a clock sensor is touched while the child safety function is on, the word SAFE will appear on the
display. The clock is locked.
To disable the function, press + and – sensors at the same time for several seconds you hear a
beep.
Caution
In case of a power failure, your electronic clock settings will be erased and 12:00 will flash on the
clock display. Reset the clock and program again.
with your fingertip until the AUTO symbol starts to flash.
to turn off the oven. You can change the remaining cooking time at
with your fingertip until the AUTO symbol starts to flash
with your fingertip until the AUTO symbol starts to flash and 00:00
until the AUTO symbol starts to flash quickly. The display will show the
to turn off the oven. You can change the remaining cooking time at
with your fingertip until the AUTO symbol starts to flash
9