Porter & Charles SOPS76TM Mode D'emploi page 8

Electronic Clock Settings
Timer Alarm: The alarm will go off at the programmed time, even if the oven has finished
cooking.
Cooking Time: This function allows you to programme the cooking time, after which the oven will
turn off automatically
Cooking Stop Time: This setting allows you to programme the time for cooking stop, after which
the oven will turn off automatically
Cooking Time and Cooking Stop Time: This setting allows you to programme the cooking time
and cooking stop time. The oven switches on automatically at the set time and operates for the
selected cooking time (Cooking Time). It then switches off automatically at the indicated time
(Cooking Stop Time).
Child Safety Function: This function locks the electronic clock, preventing small children from
playing with it.
Programming the Timer Alarm
1. Touch sensor
clock will also flash 00:00.
2. Select the time after which you want the alarm to sound by pressing the + or – sensor.
3. You will hear 2 beeps to confirm that the time has been set. The clock will start counting
down from the selected time and symbol
4. When the time is up, the alarm will go off and symbol
5. Touch any sensor to stop the alarm. Symbol
If you want to change the timer alarm, simply touch the sensor
press the + or – sensor. You will hear 2 beeps to confirm that the time has been changed. The
clock will start counting down from new time and symbol
NOTE:
You cannot see the current time on the display when the timer alarm is set.
Programming Cooking Time
1. Touch sensor
appears on the display
2. Select the cooking time by pressing the + or – sensor.
3. You will hear 2 beeps, the AUTO symbol will flash slowly and the display will show the
time left before the oven switches off automatically
4. Select a cooking function and temperature.
5. Once the cooking time is up, the oven will turn off, an alarm will sound and the AUTO
symbol will flash quickly.
6. Touch any sensor to stop the alarm and to turn off the AUTO symbol. The oven will switch
on again.
7. Set the controls to
You can change the remaining cooking time at any time by touching sensor
until the AUTO symbol starts to flash quickly. Now touch the + or – sensor to change time.
NOTE:
You cannot see the current time on the display when the timer alarm is set.
with your fingertip until symbol
with your fingertip until the AUTO symbol starts to flash and 00:00
to turn off the oven
starts flashing on the display. The
will flash slowly.
will flash quickly.
will switch off.
with your finger tip and then
will flash slowly.
with your fingertip
8