Maintenance And Inspection Obligation; Noise Emission / Personal Protective Equipment - Heiniger 707-500 Traduction De La Notice Originale

Never operate this appliance when it has a damaged cord or
X
plug, when it is not working properly, after it has been dropped
or damaged, or after it has been dropped into water. Return the
appliance to a service center for examination and repair.
Keep the cord away from heated surfaces.
X
Keep the air openings free of lint, hair, and similar objects.
X
Never drop or insert any object into any opening.
X
Do not use outdoors or operate while aerosol (spray) products
X
are being used.
Do not use this appliance with a damaged or broken comb, as
X
it has the potential to result in facial injury.
Always attach plug to appliance first, then to outlet. To dis-
X
connect, turn all controls to off position (e.g. "0") then remove
plug from outlet.
Do not charge, place or leave the appliance where it is expec-
X
ted to be:
y Subject to damage by an animal, or
y Exposed to weather
WARNING!
Keep the device dry.

1.4.2 Maintenance and inspection obligation

Only operate the clippers when it is undamaged and in proper
X
condition.
If a defect is found on the housing or on the electrical cable, it
X
must be repaired by a repair and service centre.

1.4.3 Noise emission / personal protective equipment

The acoustic emission while operating the device is typically
72 dB(A). We recommend that ear protection, safety glasses
and gloves are always worn when operating the plant.
Personal protective equipment to be provided by the operator.
Translation of the original instructions / Cattle and horse shearing machine
5