Tool Use And Set Up; Switching Forward/Reverse Switch (Normal Operation); Power On - Stanley NB08PT-18 Manuel D'instructions

6. TOOL USE AND SET UP

6.1

SWITCHING FORWARD/REVERSE SWITCH (NORMAL OPERATION)

Switch FR lever to "Stroke mode" side.
Push the FR lever from left side to right side
from the tool front.
6.2

POWER ON

Pull trigger and release to ON.
"Stanley Engineered Fastening" logo will appear
on the screen.
The tool returns home automatically.
After showing logo for a few seconds,
the screen is switched to counter screen
automatically.
*Power will be OFF automatically in 3 minutes
after trigger was pulled or the screen was
touched last.
NB08PT-18
Push
FR lever
NB08PT-18
11
E N G L I S H
PB2500Smart
Not Available
PB2500Smart