Stanley NB08PT-18 Manuel D'instructions page 20

E N G L I S H
6.13.2 In case of MANDREL, JAWS and OVERHAUL
It counts up the counter despite the
assessment result is OK or NOK.
If the counter value reaches a setting value,
the following alarm messages are shown in
the screen.
Use these alarms as a guide to know the
timing of maintenance etc.
Touch the screen somewhere to clear the
alarm and do maintenance work accordingly.
Alarm for Overhaul
Alarm for replacing mandrel
Alarm for emptying collector
Alarm for Jaw Maintenance
Alarm for Overload Error.
When the nut insertion is over than force
limit, this message appear.
*In case of over than stroke limit, no
counting up, no NOK sign and no OVERLOAD
ERROR
NB08PT-18
Not Available
Not Available
20
PB2500Smart
Not Available
Not Available