Spark Arresting Screen In Muffler; Spark Plug - Stihl MS 200 Notice D'emploi

Masquer les pouces Voir aussi pour MS 200:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

If you make the setting too lean it
will increase the risk of engine
damage through lack of
lubrication and overheating.
At sea level
N
Turn the high speed screw (H)
slightly counterclockwise (richer) –
max. up to the stop
MS 200
Spark Arresting Screen in
Muffler
In some countries, the muffler is fitted
with a spark arresting screen.
N
If engine performance deteriorates,
check the spark arresting screen in
the muffler
N
Let the muffler cool down
N
Remove screw (1)
2
N
Pull out spark arresting screen (2)
N
Clean the dirty spark arresting
screen, replace if damaged or
heavily carbonized
N
Reinsert spark arresting screen
N
Fit screw

Spark Plug

N
If the engine is down on power,
difficult to start or runs poorly at idle
speed, first check the spark plug.
N
Fit a new spark plug after about 100
operating hours – or sooner if the
electrodes are badly eroded. Install
only suppressed spark plugs of the
type approved by STIHL – see
"Specifications".
Remove the spark plug
N
Move the Master Control lever to the
stop position 0
N
Release the chain brake
English
29

Publicité

Chapitres

Table des Matières
loading

Table des Matières