Connecting Consumers - Festool SYS-PST 1500 Li HP Notice D'utilisation

General
Systainer 3 dimensions SYS3 M 187 (W x H x D)
Weight
PRCD protective adapter
Nominal frequency
Switching capacity
Current rating
5 Parts of the device
[1-1] AC charging input (with pro­
tective cap)
[1-2] AC output protective cap
[1-3] AC output
[1-4]
Carrying handle
[1-5]
Systainer lid with T-Loc
[1-6] DC output compatible with
USB‑C
TM
[1-7] On/off switch
[1-8]
PRCD protective adapter
[1-9] LED indicator
[1-10] T-Loc
[1-11] Charging cable
[1-12] Protective cover
[1-13] Transport switch
The specified illustrations appear at the
beginning of the Operating Instructions.
6.3 Applications of the PRCD protective adapter
Combination
with one con­
sumer:
Combination
with a mobile
dust extractor
(with protective cap)
No PRCD protec­
tive adapter nec­
essary.
PRCD protective
adapter [1-8]
necessary.
6 Commissioning
6.1 State of charge at
commissioning
SYS‑PST 1500 Li HP is only slightly
charged when delivered.
► Check the state of charge (see sec­
tion 7.1).
► Charging (see section 7.2).
6.2

Connecting consumers

► Open the Systainer lid with the T-
Loc [1-5].
► Deactivate transport mode: Set the
transport switch [1-13] to "I".
► Close the Systainer lid with the T-
Loc [1-5].
► Connect the mains power cable of
the consumer to the AC out­
put [1-3].
English
396 x 296 x 187 mm
16.4 kg
50–60 Hz
3500 W
16 A
21