Installation In The Model (Airplane); Installation In The Model (Heli) - GRAUPNER GR-18 Notice D'utilisation

Installation in the model (airplane)

The gyro receiver must be installed straight and at right angles to aircraft longitudinal axis, so that the rotors can work
as intended, because of the accelerometer in addition also horizontal to the longitudinal axis.

Installation in the model (heli)

The receiver has to be aligned strictly at right angles and parallel to the floor on the receiver platform on the helicopter.
You can also install on edge at right angles to the receiver. There must always be an edge of the receiver are paralell
to a Heli axis.
OK

OK

This mounting position is at the moment not
important, but for later use the accelerometers be
important (through Software Update)!
innovation & technologie
OK

OK

33