Preamble; Approved Usage; Key To The Symbols - GRAUPNER GR-18 Notice D'utilisation

Preamble

MANY THANKS
for deciding to purchase the Graupner/SJ HoTT 2.4 system. Please read right through these operating instructions
before you attempt to install and operate the Graupner HoTT 2.4 system.
• The receiver stabilises the model aircraft in difficult, windy conditions, acting on a maximum of three axes
• Proportional gyro suppression for natural flying characteristics
• Excellent stabilisation for smooth, accurate manoeuvres
• The triple-axis gyro endows even very demanding aerobatic models with docile flying characteristics, and greatly
simplifies aerobatics
• Aerobatic manoeuvres can be flown much more accurately
• Simple gyro assignment procedure
• Facility to adjust parameters using HoTT telemetry
• Altitude sensor for vario and altimeter function
Attention!
!
Prior to the installation and commissioning of the receiver be sure to read the instructions
completely.

Approved Usage

Note: The receivers may only be used in electric heli models!
The receiver is intended exclusively for use in radio-controlled models. Any other usage is prohibited, and may result in
damage to the receiver or model, and serious personal injury. We grant no guarantee and accept no liability for any type
of use outside the stipulated range.
Not suitable for children under fourteen years. This receiver is not a toy!
The receiver is also equipped with a telemetry function which is only available in combination with a Graupner/SJ HoTT
2.4 system. If you do not own a Graupner/SJ HoTT 2.4 system, the receiver will not work.
Please start by reading through the whole instructions before you attempt to install and operate the receiver.
These operating instructions are an integral part of the product. They contain important notes on operating and handling
the receiver. For this reason please store the operating instructions in a safe place, and pass them on to the new owner if
you ever dispose of the product. Failure to observe the operating instructions and safety notes invalidates the guarantee.
Here at Graupner we are constantly working on the further development of all our products; for this reason we are
obliged to reserve the right to introduce changes to the set contents in form, technology and features.
Please understand that we will not countenance claims resulting from information and illustrations in these operating
instructions.
Please store the operating instructions in a safe place for future reference!

Key to the Symbols

Caution!
This symbol alerts you to prohibited actions which must be observed at all times. Any failure
to observe the prohibited action indicated in this way may prevent the equipment working, and
endanger the safety of the operator.
Caution!
This symbol alerts you to information which must be observed at all times. Any failure to observe
the information indicated in this way may prevent the equipment working properly, and endanger
the safety of the operator.
This symbol indicates information which should always be observed in order to ensure that the
equipment operates reliably.
30