Pratissoli MK Serie Manuel De Réparation page 54

Insert the tab 16x10x90 on the pinion.
Insert the O-ring on the rear cover (pos. , Fig. 74) and fasten
it to the casing with 10 x M8x18 screws (pos. , Fig. 75).
Calibrate the screws with a torque wrench as indicated in
chapter 3.
Assemble the bearing cover (and relative seal) (pos. , Fig. 76)
using 8 x M12x30 screws (pos. , Fig. 77).
Calibrate the screws with a torque wrench as indicated in
chapter 3.
Fig. 73
Fig. 74
Complete the assembly of the mechanical part by fitting the
plugs and lifting eyebolts with the relevant O-rings.
Insert oil in the casing as indicated in the Use and
maintenance manual, par. 7.4.
Fig. 75
54
Fig. 76
Fig. 77