Connecting Selector Switch Manual/Automatic, Temperature Sensor And Vent Switch - Kingspan TRZ Plus 2A Manuel D'utilisation

SHE control panel TRZ Plus 2A and TRZ Plus Comfort;
Compact control panel 2A and Compact control panel 2A/M
Connecting Selector switch manual/automatic, Temperature sensor and
vent switch
All work to be carried out without mains supply (230 V AC) or any batteries connected. Route the connecting cables
into the control panel housing at the top. Connect all connecting cables according to the wiring diagram and make sure
that they are correctly connected. Incorrected connections or figure or colour mix-ups can lead to incorrect function of
the control panel or of the external components. The notes and installation directives in the technical documentation are
always to be observed.
Variant 1 with two temperature sensors:
Adjustable hysteresis for opening and closing of windows over the respective temperature sensor. The farther apart the
temperature values , the less unwanted movement commands from the window operators are
short-term temperature changes for example Drafts made.
Vent switch LTA25
4 3 2 1
11 10 9
á á
Variant 2 only one temperature sensor:
Automatic opening and closing of one temperature sensor. The hysteresis is determined by the sensor (eg 1-2 ° C).
Vent switch LTA11
Ö Ö
S P S P
11 10
á á
13/24999513
3
4
H
STOP A
4
Selector switch WHA-14
manuel automatic
Ö P S
8
3
3
H
A
3
Selector switch WHA-14
manuel automatic
Ö
P S
8
°C 2 °C
2 x Temperature sensor TS-1030
> 20 °C
close
open
S P Ö
< 18 °C
close
open
S P Ö
°C
Temperature sensor TS-1030
> 20 °C < 20 °C
open close
P Ö
S
58