Connecting Diagram Wind/Rain Detector; Connecting Diagram Potential Free Contacts - Kingspan TRZ Plus 2A Manuel D'utilisation

Connecting diagram wind/rain detector

All work to be carried out without mains supply (230 V AC) or any batteries connected. Route the connecting cables into
the control panel housing at the top. Connect all connecting cables according to the wiring diagram and make sure that
they are correctly connected. Incorrect connections or figure or colour mix-ups can lead to incorrect function of the
control panel or of the external components. The notes and installation directives in the technical documentation are
always to be observed.

Connecting diagram potential free contacts

All work to be carried out without mains supply (230 V AC) or any batteries connected. Route the connecting cables
into the control panel housing at the top. Connect all connecting cables according to the wiring diagram and make sure
that they are correctly connected. Incorrected connections or figure or colour mix-ups can lead to incorrect function of
the control panel or of the external components. The notes and installation directives in the technical documentation are
always to be observed.
Attention: Potential free contacts for max. 24 V / max. 0.5 amp.
4 5 6 7
2021 22
-
+
S
A
TRZ WRMAS
switches by SHE activation
13/24999513
SHE control panel TRZ Plus 2A and TRZ Plus Comfort;
Compact control panel 2A and Compact control panel 2A/M
WRM/2 24V
RM/2 24V
WRM/2 24V
-
+
1 2
RM/2 24V
20 21 22 23
-
+
TRZ WRMAS
23
WRM/2 24V
A S Ö WS
ON
3 4 5 6
RM/2 24V
ON
Wind sensor
4 5 6 7
TRZ WRMAS
switches by malfunction message
1 8
1 8
Jumper
Relay contact
3
4
(NC contact)
1 2
!
202122 23
-
+
Ö
A
57