Periodical Maintenance Checks - NSK Ti-Max X-SG20L Mode D'emploi

CAUTION
Autoclave sterilization is recommended for the product. The validity of other sterilization methods is not confirmed.
Only Handpiece, Internal Spray Nozzle and Nozzle Holder can be autoclaved. Do not autoclave other components (Y-Connector,
Irrigation Tube, etc.).
NOTICE
NSK recommends Class B sterilizers as stated in EN 13060.

9. Periodical Maintenance Checks

Every 3 months perform periodical maintenance checks, referring to the check sheet below. If any abnormalities are found, contact
your Authorized NSK Dealer.
Points to check
Head cap is loose Check that the Head Cap is firmly tightened.
Rotate the handpiece and check for abnormalities such as abnormal rotation, vibration, noise, and
Rotation
overheating.
Details
21