NSK Ti-Max X-SG20L Mode D'emploi page 13

6-1 External Spray Nozzle
Connect the Irrigation Tube to the External Spray
Nozzle firmly. (Fig. 5)
6-2 Internal Spray Nozzle
Only for a drill with internal irrigation system.
1) Attach the Nozzle Holder. (Fig.6)
2) Connect the Irrigation Tube to the Internal Spray
Nozzle firmly. (Fig.7)
3) Insert the end of the Internal Spray Nozzle into
the hole at the top of the handpiece head, then
attach the Internal Spray Nozzle into the slot on
the Nozzle Holder. (Fig.8)
Irrigation Tube
External Spray
Nozzle
Internal Spray Nozzle Irrigation Tube
Fig. 5
Fig. 7
Nozzle Holder
Fig. 6
Fig. 8 11