NSK Ti-Max X-SG20L Mode D'emploi page 21

NOTICE
NSK recommends the use of Spray Mist Absorber (Y900084) to prevent oil mist expelling out of the handpiece head.
Chuck cleaning (X-SG93L / X-SG93)
Clean the Push Button chuck once a week.
1) Mount the Tip Nozzle onto the spray can port.
2) Lubricate the chuck directly where the bur is inserted (Fig. 18).
3) Lubricate handpiece by using NSK PANA SPRAY Plus / PANA SPRAY (Fig. 15) or NSK
automatic handpiece cleaning and lubrication system.
CAUTION
If the chuck is not regularly cleaned the chuck grip may be weakened and the
bur may be accidentally released during use.
8-7 Sterilization
Sterilize the product by autoclave sterilization. After each patient sterilize as noted below.
The following items can be autoclaved: Handpiece, Internal Spray Nozzle, Nozzle Holder
Bur Insertion Hole
Tip Nozzle
Fig. 18
19