NSK Ti-Max X-SG20L Mode D'emploi page 11

NOTICE
For easy operation of the Chuck Release Button, simply grip the handpiece and use your thumb tip to press the Chuck
Release Button.
5-2 Removing the Bur
Depress the Push Button to open the chuck (
CAUTION
Do not use bur/drills with problems listed below as the bur/drill may break, seize up
or disengage from the chuck.
- Bent, deformed, worn, rusted, broken, deficient bur/drill.
- Bur/drill which is cracked on the edge or axis.
- Non-ISO(EN ISO) standard, or tampered bur/drill.
Do not use bur/drills other than specified in "10. Specifications" as such bur/drills
may be accidentally released or break during rotation.
) and, while the chuck is open, remove the bur/drill ( ).
Push Button
Fig. 4
9