NSK Ti-Max X-SG20L Mode D'emploi page 17

Automatic Cleaning (External and Internal Surfaces)
Use a thermo-disinfector in accordance with ISO 15883 (EN ISO 15883).
Refer to the thermo-disinfector manual.
CAUTION
After washing with thermo-disinfector, prior to lubrication, dry the product until all internal moisture is completely removed.
Thermo-disinfector moisture remaining inside the product could reduce the effect of lubrication and could cause corrosion
inside of the product.
8-3 Cleaning of Optic Illumination Points
Wipe clean all Optic Illumination Points (Glass Rod) using an alcohol-immersed cotton
swab. Remove all debris and oil.
CAUTION
Do not use a sharp tool to clean the Glass Rod. It could damage the glass and
reduce the light transmission.
Cotton Swab
Glass Rod
15
Fig. 12