Compression Load Cell PR 6201
3.3
Additional lift-off protection
Sartorius Intec
For safety reasons, a lift-off protection has to be generally provided on vessels. This
can be constructed separately or additionally installed in the mounting kit (see
Chapter 11.2.1).
For this purpose, the simplest version requires the following components:
-
1× threaded bar (1)
-
3× nut (2)
-
1× washer (3)
Assembly:
-
Mount the threaded bar (1) so that it has sufficient free moving space in the drill
hole.
-
Lock the nuts (2) so that there is a remaining distance A* from the washer (3).
* A = 2 mm
This distance is essential to avoid force shunts.
3 Design recommendations
EN-8