Publicité
Les langues disponibles
Les langues disponibles
OPERATION PROCEDURE :
POWER ON
Install 4PCS AA batteries.The monitor will power on along with
a beep sound for 1 second. The LCD will show all segments for 2
seconds, then display the wheel diameter and unit type (miles or
kilometers) for 1 second. Finally, the display will go to the USER
setting mode.
Without any signal input for 4 minutes the monitor will go into Sleep
mode. Press any key to wake up monitor.
SETTING USER DATA
Use the UP & DOWN keys to select a USER from U1~U4. Press MODE to confirm. Set Gender/ Age/
Height/ Weight. Once set the display will go to the Program menu.
WORKOUT MODE SELECTION
Use UP&DOWN KEY to select workout mode as: Target Time/ Target Distance Target Calories/ Target
H.R./ Target Watt/ Watt Program.
QUICK START PROGRAM
1. Press the START button to start working out immediately. The TIME
will begin to count up and DISTANCE/ CALORIES/ RPM/ SPEED/
WATT/ RPM & HEART RATE will display the values accordingly.
2. The character animation only shows the USER, it will skip to next
figure every 0.1KM (or ML).
3. Press STOP button to stop workout. When the STOP icon is blinking
all values will remain. To resume Program, press START.
4. In STOP mode press the RESET button and the monitor will return to
the program screen.
23
Publicité
Chapitres
