BH LK700FB Guide D'utilisation page 19

STEP 4. ATTACHING THE HANDLEBARS AND SIDE SHAFTS
Attach the Left Handlebar (H-1) onto the Main Frame (C) and use the 19mm side of Wrench
provided to tighten. Use the same procedure to attach the Right Handlebar (I-1).
Slide the Left Side Shaft (G-1) on the inside of the Left Handlebar (H-1) and secure with Bolt
(B-2), Bushing (B-4) and Nylon Nut (B-3). Use the Spanner Wrench and Allen Wrench to
secure the Left Side Shaft (G-1). Use the same procedure to attach the Right Side Shaft (I-1).
I 1
-
H-1
C
G-1
2x
2x
2x
19