BH LK700FB Guide D'utilisation page 20

STEP 5. INSERTING THE SEAT TUBE
AND ATTACHING THE SEAT
Slide the Seat (F-8) onto the Seat Rail (F-3)
and align the Seat (F-8) so it is straight and
level. Then tighten the nuts on both sides of
the Seat(F-2) with the Box Wrench provided.
Insert the Seat Tube (F-3) into the Main Frame
(C), choose the desired position and tighten
the knob (C-2), but not fully tight. Adjust the
Seat Tube (F-3) up and down until you hear
a "click". This is the pin on the Adjustment
Knob (C-2) seating into the adjustment holes
on the Seat Tube (F-3). When the Adjustment
Knob is seated, tighten firmly.
20
Note: To adjust the seat up and down
loosen the Adjustment Knob about 3 turns
then pull out on the knob (it is spring
loaded). Then adjust the Seat Tube (F-3)
up or down and release the Adjustment
Knob when you get to the desired
position. Make sure the Adjustment Knob
is seated, pull up on the Seat Tube until
you hear a "click". If you cannot move the
seat post up it is secure and then tighten
the adjustment knob.
**To adjust the seat forward and backward,
loosen the Seat Slider Knob (F-5) and
slide the seat forward or backward. Once
to the desired position, tighten the Seat
Slider Knob (F-5).
F-5
C