Pari Lamira Notice D'utilisation page 42

• Insert the aerosol head (3) into the
openings on the medication reservoir. It
must snap noticeably into place.
NOTE:
Never touch the membrane (the curved
metal surface in the middle of the aerosol
head) because it can be damaged very
easily.
• Insert the inspiratory valve (6) in the
aerosol chamber.
When doing so, ensure that both valve
flaps are seated correctly and face the
aerosol chamber after insertion. They
must lie perfectly flush.
6
38
3
• Close the aerosol chamber.
NOTE:
If the snap closure does not close,
check whether the inspiratory valve has
been inserted correctly. It must lie flush
against the aerosol chamber.
• Fasten the mouthpiece (7) to the
aerosol chamber.
• Connect the connection cord (8) to the
nebuliser handset.
7
8
®
Lamira - 2020-08