Cleaning And Disinfection; Nebuliser Handset; Preparation; Hygienic Reprocessing At Home - Pari Lamira Notice D'utilisation

CLEANING AND DISINFECTION

5

Nebuliser handset

The nebuliser handset and the aerosol
head must be cleaned and disinfected
immediately after each use.

Preparation

Disassemble the nebuliser handset into its
individual parts:
• Pull the connection cord out of the
nebuliser handset.
• Remove the mouthpiece from the
nebuliser handset.
Info:
The expiratory valve is held in place
by a thin fixing clip so that it cannot
get lost. This clip must not be
detached from the mouthpiece.
• Open the medication reservoir.
• Open the aerosol chamber.
• Remove the aerosol head (3).
To do this, gently press the lateral
engaging hooks together.
• Remove the inspiratory valve from the
aerosol chamber.
®
Lamira - 2020-08
3
Hygienic reprocessing at
home
NOTE:
Placing all the parts of the nebuliser
handset and the aerosol head in warm
washing water straight after the applica-
tion prevents medication residue from
accumulating. This helps you to prevent
potential extension of the nebulisation
time due to partial closure of the pores in
the membrane.

Cleaning

Clean the nebuliser handset and the
aerosol head immediately after each
application.
• Rinse all nebuliser handset parts and
the front and back of the aerosol head
(for 10 seconds each) under warm
running tap water.
• Place all nebuliser handset parts and
the aerosol head in warm tap water with
a little washing up liquid for 5 minutes. If
the parts are heavily soiled, move the
nebuliser handset parts gently back and
forth in the washing water.
en
43