Pausing During Inhalation; Display Indicators During Inhalation - Pari Lamira Notice D'utilisation

Pausing during inhalation

The inhalation session can be interrupted
briefly if necessary by using the Pause
function:
• Press the ON/OFF button for approx.
1 second.
Pause mode is activated when the LED
flashes green.
• Press the ON/OFF button for approx.
1 second again to resume the inhalation
session.
Info:
The Pause function can only be
activated after an operating time of
a few seconds.
In the case of longer pauses, switch the
controller off by pressing the ON/OFF but-
ton for at least 2 seconds.
Provided there is enough liquid in the
medication reservoir, nebulisation can be
restarted by pressing the ON/OFF button.
®
Lamira - 2020-08
Display indicators during
inhalation
The following indicators appear on the
display during inhalation:
Start
During
inhalation
Nebulising with battery power
Nebulising with mains power
Pause
function
activated
Pause function during battery
operation
Pause function during
operation with mains power
en
41