Auto Power Off; Important; Config Operation Mode - Promax PROFI-70 Manuel D'utilisation

USER'S MANUAL. PROFI-70
c) LANGUAGE
Only available in ENGLISH.
d) BEEP
This function permits to activate (ON) or deactivate (OFF) the PROFI-70 beeper.
When it is on, it sounds on pressing any key in order to alert the user.
e) AUTO POWER OFF
This field permits to activate (ON) or deactivate (OFF) the POWER-OFF function.
When this function is ON, the unit automatically turns off when it has remained
inactive for a period of 10 minutes.
The lower part of the screen displays the battery charge level (BATTERY)
expressed in volts (13.17 in the prior figure), the control program version
(FIRMWARE) (5.88 Hw 3) and the equipment serial number (010066584).
To exit the internal function configuration menu and return to the main menu,
press the BACK option from the lower selection box, or the direct main menu
access button [12].

4.2.2 CONFIG operation mode

This menu allows users to define all of the parameters necessary to make
measurements correctly. In order to access them, use the navigation buttons [6] to
move the selector, and once the field you want to modify is marked, press the select
button [7]. Then it will be possible to use the select buttons or alphanumeric keypad [8]
to modify their value. Lastly, press the new selection button [7] to validate the new
value.
05/2008
Figure 6. - Cable modem configuration menu.

IMPORTANT

Page 17