Analyse Operation Mode - Promax PROFI-70 Manuel D'utilisation

This representation of the complete band allows a fast valuation of the spectral
distribution of the transmitters and to avoid therefore the congestión of certain channels.
It is possible to the future wait for an increase of the simultaneous traffic of signals due
to the increase in of the number of interconnected stations or the possible occasional
interferences of other signals that operate in the free band of 2.4 GHz
(DECT telephones) and home products as microwaves.
From this operating mode, the programmable keys [F3] and [F5] allow to
accede to the SEARCH mode or the ANALYSE mode.

4.2.5 ANALYSE operation mode

The ANALYSE operating mode provides the following measurements:
- Power of the received station.
- Signal/noise ratio.
- Graphical representation of the power by means of an analogue bar.
- Frequency and channel used in transmission.
- Name and identifier of network station.
- Number of stations detected in channel.
- Interval of the beacon signal.
- Type of signal modulation and encriptation.
- Mode of network configuration.
Page 22
Figure 12.- ANALYSE function.
USER'S MANUAL. PROFI-70
05/2008