How To Use This Manual; Exploded Diagram - Yamaha EF2000iS Manuel D'atelier

FOREWORD
This manual was written by the YAMAHA
MOTOR POWERED PRODUCTS CO., LTD.
primarily for use by Yamaha dealers and their
qualified mechanics. It is not possible to put an
entire mechanics education into one manual,
so it is assumed that persons using this book
to perform maintenance and repairs on
Yamaha generators have a basic understand-
ing of the mechanical precepts and proce-
dures inherent to generator repair technology.
Without such knowledge, attempted repairs or
service to this model may render it unfit for use
and/or unsafe.
YAMAHA MOTOR POWERED PRODUCTS
CO., LTD. is continually striving to further
improve all models manufactured by Yamaha.
Modifications and significant changes in spec-
ifications or procedures will be forwarded to all
Authorized Yamaha dealers and will, where
applicable, appear in future editions of this
manual.
EF2000iS
SERVICE MANUAL
©2009 by YAMAHA MOTOR POWERED
PRODUCTS CO., LTD.
1st Edition, May 2009
All rights reserved. Any reprinting or
unauthorized use without the written
permission of YAMAHA MOTOR
POWERED PRODUCTS CO., LTD.
is expressly prohibited.
Printed in JAPAN

HOW TO USE THIS MANUAL

PARTICULARLY IMPORTANT
INFORMATION
This material is distinguished by the following
notation.
This is the safety alert symbol. It is used to
alert you to potential personal injury haz-
ards. Obey all safety messages that follow
this symbol to avoid possible injury or
death.
WARNING
A WARNING indicates a hazardous situa-
tion which, if not avoided, could result in
death or serious injury.
NOTICE
A NOTICE indicates special precautions
that must be taken to avoid damage to the
machine or other property.
TIP
A TIP provides key information to make proce-
dures easier or clearer.
MANUAL FORMAT
The procedures in this manual are organized
in a sequential, step-by-step format. The infor-
mation has been compiled to provide the
mechanic with an easy to read, handy refer-
ence that contains comprehensive explana-
tions of all disassembly, repair, assembly, and
inspection operations.
In this revised format, the condition of a faulty
component will precede an arrow symbol and
the course of action required will follow the
symbol, e.g.,
9 Bearings
Pitting/damage → Replace.

EXPLODED DIAGRAM

Each chapter provides exploded diagrams
before each disassembly section for ease in
identifying the correct disassembly and
assembly procedures.