Coolant Level Check - SWM Superdual 2017 Manuel - Utilisation - Entretien

Masquer les pouces Voir aussi pour Superdual 2017:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

COOLANT LEVEL CHECK

Check level (1) in right-hand radiator when engine is
cold (place the motorcycle so that it is perpendicular
to the ground). The coolant should be approximate-
ly 10 mm above cells and besides, it shall not exceed
the middle of the expansion tank (2) located in front
of the rear shock absorber.
The radiator cap (3) features two locking positions,
the first being for the previous pressure discharge
of the cooling system.
1
2
CAUTION*:
Avoid removing radiator cap (3) when engine
is hot, as coolant may spout out and cause
scalding.
3
CAUTION*:
Because the cooling fan (4) can be activated
even when the start switch is in OFF position,
always keep at a safe distance from the fan
blades.
Note*:
Difficulties may arise in eliminating coolant from
painted surfaces. If this occurs, wash off with wa-
ter.
4
EN - 25

Publicité

Table des Matières
loading

Table des Matières