• remove the three metal filters (6), (7) on engine
left-hand side, and filter (8) on the right-hand
side (between cover and crankcase), check the
O-rings for wear and wash the filters clean with
fuel; reassembly procedure is the same as for dis-
assembly, in the reverse order;
• to change filter cartridge (9) you need to loosen
the retaining screws and remove the cover;
• once filters are replaced, reinstall the drain plugs
(5) and (5a), and fill with the specified oil quantity.
CAUTION*:
Pay attention to the filter (8) reassembling di-
rection.
EN - 24
7
23
6
8
4 9