Throttle Cable Adjustment - SWM Superdual 2017 Manuel - Utilisation - Entretien

THROTTLE CABLE ADJUSTMENT

To check the correct adjustment of the throttle ca-
ble, operate as follows:
- Close the taps (1) located on either side of the
tank;
- disconnect tube (2) from the tank;
- loosen screw (3) and remove the tank;
- loosen screw (4) and remove the protection cover
(5);
- turn throttle twistgrip (6) and make sure it has
about 0.08 in. free play;
- if it is not so, loosen the lock nuts (7) and suitably
turn the adjuster screws (8) (loosen to decrease
play or tighten to increase it);
- tighten back the lock nuts (7);
- reassemble all parts, in the reverse order com-
pared to disassembly.
WARNING*: Operation with damaged throttle
cable could result in an unsafe riding condi-
tion.
WARNING*: Exhaust gas contains poisonous
carbon monoxide. Never run the engine in-
doors.
1
2
3
4
5
6
8
7
7
EN - 27