SWM Superdual 2017 Manuel - Utilisation - Entretien page 102

BRAKE PADS REMOVAL
- Remove clips (1).
- Slide out pin (2).
- Remove pads.
WARNING*:
Do not work the brake lever or pedal while re-
moving the pads.
ANTERIORE FRONT
2
POSTERIORE REAR
1
2
EN - 42
PADS WEAR
Check brake pad wear.
Service limit " A" is: 0.15 in.
If service limit is exceeded, always replace the pads
in pairs.
1
FRONT
PADS CLEANING
Be careful that no brake fluid or any oil gets on
brake pads or discs. Clean off with alcohol any fluid
or oil that inadvertently gets on the pads or disc.
Replace the pads with new ones if they cannot be
cleaned satisfactorily.
PADS INSTALLATION
- Install new brake pads.
- Reassemble the two pins (2) and the clips (1).
WARNING*:
Do not attempt to ride the motorcycle until
the brake lever or pedal are fully effective.
"Pump" with the brake lever or pedal until the
pads are against the discs. The brake will not
function on the first application of the lever or
pedal.
FRONT
REAR
REAR
1
3
1
2