Specifications - Arcam AV860 Manuel

specifications

Continual improvement policy
Arcam has a policy of continual improvement for its
products. This means that designs and specifications
are subject to change without notice.
AV860
Stereo line inputs
Maximum input
Nominal sensitivity
Input impedance
Signal/noise ratio (A-wtd ref 100W) normal/stereo direct
Frequency response
Preamplifier outputs
Nominal output level
Output impedance
THD+N (20Hz—20kHz)
Headphone output
Maximum output level into 32Ω
Output impedance
General
Mains voltage
Power consumption (maximum)
Power consumption (idle, typical)
Power consumption (standby)
Dimensions
W x D (including speaker terminals) x H (including feet)
Weight (net)
Weight (packed)
Supplied accessories
E&OE
NOTE: All specification values are typical unless otherwise stated.
4.5V rms
1V, 2V, 4V (user adjustable)
47kΩ
100dB/110dB
20Hz—20kHz ± 0.1dB
1V RMS / 2V RMS
560Ω
–100dB
2Vrms
<5Ω
110–120V or 220–240V, 50 –60Hz
50W (Thermal dissipation approx. 170 BTU/hour)
50W (Thermal dissipation approx. 170 BTU/hour)
<0.5W
433 x 425 x 171mm
10.25kg
14.25kg
Mains lead
Remote control
2 x AAA batteries
Manual
DAB/FM aerial
Calibration microphone
USB cable
E-42