Analogue Audio Inputs - Arcam AV860 Manuel

Digital audio connectors
DIGITAL AUDIO
SAT PVR
BD CD STB AV
COAXIAL OPTICAL
SPEAKER OUTPUT
SAT, PVR, BD, CD, STB, AV
Connect these inputs to the digital outputs of your
available source equipment.
Zone 2 connectors
Z2 OUT
ZONE2
OUT
HEIGHT 1 HEIGHT 2
The Z2 out HDMI connector can be used to connect the
output of the Receiver to an system located in a second
room.
Analogue preamplifier outputs
PREAMP OUT
FL SL C SBL
FR SR SUB SBR
All preamplifier analogue outputs are buffered, have a
low output impedance, are at line level and follow the
Zone 1 volume control setting. They are able to drive
long cables or several inputs in parallel if required.
For more information on connecting speakers or
additional power amplifiers, see page E-15 and E-16.
The AV860 has XLR outputs in addition to the phono
pre-outs for connection to an external amplifier.

Analogue audio inputs

HDMI
Z2 OUT STB GAME AV BD PVR CD
ANALOGUE AUDIO
HEIGHT 1 HEIGHT 2
STB, GAME, AV, BD, PVR, CD
Connect the left and right inputs to the left and right
outputs of your source equipment.
Front panel AUX input
The front panel input can be used as an analogue
AUX
input, using a stereo 3.5mm lead.
Front panel PHONES socket
This socket accepts headphones with an impedance
rating between 32Ω and 600Ω, fitted with a 3.5mm
stereo jack plug. The headphone socket is always active,
except when Receiver is muted.
When the headphone jack is inserted, the speaker
outputs and analogue preamplifier outputs are
automatically muted.
E-11